Advanced Products
for Advanced Cleaning
|
|
Precision Cleaners
|
|
Product |
Application |
Description |
| AXAREL 32 |
Defluxing |
Semi-Aqueous Hydrocarbon Cleaner. Removal of Flux and Solderpaste
Residues. Environmentally friendly, closed-loop process possible.
Application 100% in Spray in Air or Ultrasonic Tanks , and as
Emulsion in Spray-machines. Fp=91°C |
| AXAREL 2200 |
Stencil Cleaning Solderpastes
|
Solvent Cleaner for Stencil Cleaning Solderpaste, Misprint
Cleaning, manual and spark proof Spray-machines. Fp=41°C.
Available in pre-saturated Wipes. |
| BIOACT SC10E |
Stencil Cleaning Solderpastes & Adhesives |
Citrus Terpene Cleaner for Stencil Cleaning Solderpaste, SMD
adhesives, Misprint Cleaning, manual and sparkproof Spray-machines,
fast drying. Fp=52°C |
| BIOACT SC22 |
Stencil Cleaning Solderpastes, Defluxing
|
Alcohol based Cleaner for Cleaning Stencils Solderpaste, Misprint
Cleaning, in sparkproof Spray machines and as Emulsion with
no flashpoint as strong Cleaner for Defluxing in Spray-machines,
most run at 25% Emulsion.. Fp=62°C |
| HYDREX DX |
Defluxing, Solderframe Cleaning |
Aqueous Cleaner for Spraycleaning, very low VOC, alkaline
pH 12. Cleans Circuit Boards, Solderframes, Guides and Tools
at Room temperature (20-25°C). No flashpoint. To be used
at 15 – 25% dilution in DI-water |
| HYDREX LF |
Defluxing, Solderframe Cleaning, Stencil Cleaning |
Aqueous Cleaner for Spray and Ultrasonic cleaning, VOC compatible,
alkaline (10% solution ph 11). Very strong Defluxer and Stencil
Cleaner, especially for new (lead-free) no-clean Flux Residues.
Easy to rinse, no Flashpoint. To be used at 15 – 25% dilution
in DI-water
|
| HYDREX WS |
Stencil Cleaning Solderpastes, underwipe |
Aqueous Cleaner for Stencil Cleaning Solderpaste. Use as underwipe
Cleaner in Stencil-Printers. No Flashpoint. Does not need water-rinse,
can be used in cascade. To be used as is, no dilution necessary. |
| HYDREX SP |
Misprint Cleaning
|
Aqueous Cleaner for Spraycleaning, VOC compatible, ph-neutral.
Stencil Cleaner for Solderpastes. Needs 35°C Working Temperature,
No Flashpoint. To be used at 15 – 25% dilution in DI-water |
| HYDREX SP50 |
Stencil Cleaning Solderpastes, Adhesives, Defluxing
|
Aqueous Cleaner for Spraycleaning, low Solvent Content (50%),
VOC compatible, ph-neutral. Very strong Stencil Cleaner for
Solderpastes and all SMD Adhesives. Needs 35°C Working Temperature,
good Defluxer in Spray-machines, especially good under BGA and
flip-chip. No Flashpoint. To be used at 15 – 25% dilution
in DI-water |
| |
|
|
Precision
Cleaners |
| Produkt |
Anwendung |
Beschreibung |
| AXAREL 1000 |
Removal of grease, mineral oil, lubricants, coolants, synthetics,
and particulates. |
An approved MIL-PRF-680B Type I solvent cleaner designed for
hand-wiping and immersion applications.
AXAREL1000 is selected when low odor solvent with fast drying
characteristics is required. It is also suitable for use in
airless vacuum hydrocarbon equipment. Fp=53°C
|
| AXAREL 2000 |
Removal of grease, mineral oil, lubricants, coolants, synthetics,
and particulates. |
An approved MIL-PRF-680B Type II solvent cleaner designed
for hand-wiping and immersion applications.
AXAREL 2000 is selected when a low odor solvent with exceptional
drying characteristics is required. It is also suitable for
use in airless vacuum hydrocarbon equipment. Fp=62°C |
| AXAREL 4100 |
Removal of grease, mineral oil, lubricants, coolants, synthetics,
and particulates. |
Hydrocarbon Solvent for manual cleaning. Removal of Lubricants,
Fingerprints. Application 100% in dip tanks. Fp=41°C. Available
in wipes. Approved to Rolls Royce CSS255. Conforms ASTM F 945
(Stress-Corrosion of Titanium Alloys by Aircraft Engine) by
Scientific Material International, (July 22, 1994) |
| AXAREL 6100 |
Removal of grease, mineral oil, lubricants, coolants, synthetics,
and particulates. |
Hydrocarbon Solvent for manual cleaning. Removal of Lubricants,
Fingerprints. Application 100% in dip tanks. Fp=61°C. Available
in wipes. Approved to Rolls Royce CSS255. (Stress-Corrosion
of Titanium Alloys by Aircraft Engine) by Scientific Material
International. (September 13, 1991) |
| AXAREL 9100 |
Removal of grease, mineral oil, lubricants, coolants, synthetics,
and particulates. |
An approved MIL-PRF-680B Type III solvent cleaner designed
for hand-wiping and immersion applications.
AXAREL 9100 is a non-hazardous cleaner, suitable for use at
elevated temperatures in variety of commercially available cleaning
equipment. Fp=96°C |
| BIOACT 105 |
Removal of grease, mineral oil, lubricants, coolants, synthetics,
and particulates. |
Terpene based Solvent for manual cleaning. Removal of Lubricants,
Fingerprints. Application 100% in dip tanks. Fp=41°C. Available
in wipes. Pratt & Whittney Commercial Standard Practices
Manual SPOP 208; PMC 8929 |
| BIOACT 280E |
Dewaxing |
High flashpoint Hydrocarbon Solvent for removal of high temperature
melting waxes. Application in heated tank process at 100%. Fp=141°C.
Pratt & Whittney Commercial Standard Practices Manual SPOP
37 – Method 2. |
| BIOACT AE/O |
Asphalt Extraction testing |
Ideal alternative to chlorinated solvents traditionally used
for performing asphalt-content extraction tests on bituminous
highway mix, fp = 47°C |
| |
|
|
Special
Cleaners |
| Produkt |
Anwendung |
Beschreibung |
| LENIUM DF |
Silicon Deposition Fluid
Silicon Cleaning Solvent
|
A proprietary blend of 3M™ NOVEC HFE-7100, octam ethyltrisiloxane
and isopropanol. The product is suitable for use as a diluent
and carrier fluid for silicone base lubricants. It has excellent
solubility for silicone lubricants, but does not attack sensitive
plastic components. For this reason it may be used in variety
of medical applications. |
| LENIUM TS |
Silicon Tube Swelling Fluid |
A proprietary blend of 3M™ NOVEC HFE-7100, and octam
ethyltrisiloxane. The product is designed for use at room temperature
as a swelling fluid for silicone tubing. Although the product
will swell silicone tubing, it does not attack sensitive plastic
components. |
| |
|
|
Aqueous
Cleaners |
| CleanSafe 585 |
Removes drawing & stamping oils, coolants, synthetics,
metal working fluids |
A high performance aqueous cleaning agent specially designed
for ultrasonic equipment. It is safe on ferrous and non-ferrous
alloys such as aluminum, copper and copper alloys, magnesium,
nickel, steel, stainless steel, titanium, zinc. It is also compatible
with polymeric substrates and elastomers. Fp=non |
| CleanSafe 787 |
Degreasing |
Mildly alkaline, removes difficult soils, ultra low foaming
at temperatures above 50°C. This Low VOC cleaner contains
no glycols or water soluble solvents. May be used in ultrasonic
tanks as well as in spray-equipment. Easy to rinse, high reserve
alkalinity, Biodegradable.. Residue-free rinsing. pH 12... |
| CleanSafe 787C |
Degreasing |
Mildly alkaline cleaning agent to clean ferrous and non-ferrous
substrates, ultra low foaming at room temperature. Excellent
soil loading., For immersion and spray cleaning at 21 –
65°C in 5% - 15% concentration with DI-water. Biodegradable.
Residue-free rinsing. pH 12-13 |
| CleanSafe 7200 DTX |
All purpose Cleaner |
Mildly alkaline cleaning agent to clean ferrous and non-ferrous
substrates. Excellent reserve alkalinity. Excellent corrosion
inhibition of ferrous alloys. Inhibits oxidation of copper and
copper alloys. This Low-VOC cleaner contains no glycols or water
soluble solvents. Biodegradable. Residue-free rinsing. pH 12 |
| CleanSafe 50E plus |
Degreasing Copper-Brightening |
Aqueous Cleaner, mildly acid. Brightens Copper and Copper
Alloys. Essentially non-toxic and contains no chlorine or phosphates.
To be used in immersion process. In a large number of applications
an acid dip for brightening can be avoided by use of CleanSafe
50E. plus |
| |
|
|
| |
|
|
